Preparation : Paving should be sound, clean and free from dirt, dust, oil, etc.

Surfaces can be damp prior to application, but a better seal would be achieved if the paving is dry. We recommend cleaning with Nexus paving & driveway cleaner prior to application.

Application : The sealer is supplied ready for use and should be applied when the surface temperature of the paving is between 5°c and 25°c. As a guide, the stone should be cool to the touch.

Shake the container well prior to use, application may be made by brush, roller or spray (ensuring appropriate PPE is worn).

Apply a complete, even coat over the whole surface ensuring any excess is removed- allow to dry for 30 minutes.

Apply a second even coat and leave to cure (dependent on temperature, this second coat should be fully cured in around an hour. an extra coat may be required on porous paving).

MPORTANT: ALWAYS TEST IN A HIDDEN AREA PRIOR TO USE AND ONLY PROCEED WHEN SATISFIED WITH RESULTS.

The technical information supplied is based on data obtained by Nexus and is considered accurate.

However, no liability is accepted for any loss or damage arising directly or indirectly from the use of Nexus's products, or from any information given in publications.

Prospective users should therefore satisfy themselves by appropriate trials that the product is suitable for the intended use.

We can provide very competitive delivery prices to most destinations within mainland UK.

Some combinations of product and destination cannot be calculated online. If you cannot find the delivery charge to your area, please call our sales team on 01282 860 571 or email salesoffice@stonepaving.co.uk for a delivery quote.

Please refer to our Delivery Terms at the bottom of our home page.