Preparation : Substrates should be sound, clean and free from dirt, dust, oil, etc, and must be totally dry. We recommend thorough cleaning using the PaveCare™ Paving & Driveway Cleaner (see page 42 for more information). PRO-810™ Invisible Paving Sealer is designed as an invisible coating but may darken very light surfaces slightly. As with all sealants, test on a small inconspicuous area before full application.

Application : The sealer is supplied ready for use and should be applied when the surface temperature of the paving is between 5o C and 25o C. Application may be made by brush, roller or spray. Apply a complete, even coat over the whole surface ensuring any excess is removed. Allow to dry and repeat application with a thin and even second coat to provide increased protection. Dryness will normally occur within 2 hours with full curing taking up to 24 hours. Protect from rain until cured. All tools/equipment should be thoroughly cleaned after use using a suitable solvent such as white spirit. Waste material should not be emptied into drainage systems.

Coverage : PRO-810™ covers approximately 7 - 12m2 per litre depending on substrate porosity

We can provide very competitive delivery prices to most destinations within mainland UK.

Some combinations of product and destination cannot be calculated online. If you cannot find the delivery charge to your area, please call our sales team on 01282 860 571 or email salesoffice@stonepaving.co.uk for a delivery quote.

Please refer to our Delivery Terms at the bottom of our home page.