PaveCare^TM Wearing appropriate PPE, dilute 1 part Porcelain Cleaner to 5 parts warm water and apply to the surface of the paving to be treated using a low pressure sprayer or brush.

Leave for 15 to 20 minutes* then hose or pressure wash off paving with plenty of cold water. (When using inside, use a wet sponge and clean water to wipe off.)

For stubborn stains, apply neat and agitate with a brush before removing from the surface.

*Ensure the product does not dry on treated surfaces. Not suitable for use in or around fish ponds or aquariums. WASH HANDS AND EXPOSED SKIN AFTER USE.

IMPORTANT: ALWAYS TEST IN A HIDDEN AREA PRIOR TO USE AND ONLY PROCEED WHEN SATISFIED WITH RESULTS.

The technical information supplied is based on data obtained by Nexus and is considered accurate.

However, no liability is accepted for any loss or damage arising directly or indirectly from the use of Nexus's products, or from any information given in publications.

Prospective users should therefore satisfy themselves by appropriate trials that the product is suitable for the intended use.

We can provide very competitive delivery prices to most destinations within mainland UK.

Some combinations of product and destination cannot be calculated online. If you cannot find the delivery charge to your area, please call our sales team on 01282 860 571 or email salesoffice@stonepaving.co.uk for a delivery quote.

Please refer to our Delivery Terms at the bottom of our home page.