• Joint-It
  • Joint-It
  • Joint-It
  • Joint-It
£40.00

Joint-it

Joint-It Simple is a ready-mixed, permeable, jointing compound that can be applied in all weathers.

Joint-It Simple can be applied to Concrete Paving Slabs, Cobbles, and Natural Stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles.

Joint-It Simple is available in 3 paving-friendly colours.

STEP 1: PREPARATION
Make sure all joints are clear of any dirt, oil, grease and debris. Make sure all joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm.

STEP 2: PRE-WET
Soak the area well prior to opening and spreading Joint-It Simple.

STEP 3: POUR
Open the tub and immediately pour Joint-It Simple onto the area.

STEP 4 : WORK-IT-IN
Using a squeegee or street broom, spread Joint-It Simple evenly. Work-it-in so that it goes deeply into the joints and is well compacted.

STEP 5: ADD MORE WATER
Add more water sparingly to help Joint-It Simple flow into the paving joints. Work diagonally across the joints to make sure that Joint-It Simple has penetrated all of the paving joints.

STEP 6: FINAL CLEANING
Clean the surface carefully with a fine-hair broom so that all Joint-It Simple is removed. Always sweep diagonally across the joints. Any residual materials can be swept off after application using a soft broom.

We can provide very competitive delivery prices to most destinations within mainland UK.

Some combinations of product and destination cannot be calculated online. If you cannot find the delivery charge to your area, please call our sales team on 01282 860 571 or email salesoffice@stonepaving.co.uk for a delivery quote.

Please refer to our Delivery Terms at the bottom of our home page.