Fine Brown Yorkstone

Bridge Street Stone

  • Fine Brown Yorkstone
  • Fine Brown Yorkstone
  • Fine Brown Yorkstone
  • Fine Brown Yorkstone
  • Fine Brown Yorkstone

Fine Brown Yorkstone

Bridge Street Stone


£67.00 Inc VAT


Fine Brown Yorkstone

Made to order

Cut on site at our stone cutting plant in Colne and hand finished by our time served stone masons. Please Call for current stock levels.

Fine Brown is a carboniferous sandstone; grey/buff when quarried, weathering to a rich buff/brown. It is a fine to medium-grained Sandstone that is very durable with good weathering properties. The fine grain gives a smooth refined surface when sawn which complements the subtle tonal variation of the stone. The base colour of buff/brown exhibits sporadic glittering mica fine grains giving a natural sparkle to the stone. Some stones display swirls and banding and these are again natural features of the stone.

The slabs are cut direct from the block into 38mm and 50mm thickness sheets (other thicknesses can be cut to order). From here the slabs are cut into the desired sizes (see table below). Bespoke orders can be produced in sizes up to 2500 X 900 (please call for further details).

Fine Brown York cut at 50mm thickness is ideally suited to high specification applications that include; internal use, patio and pathway applications and LGV driveways or vehicle over-run areas. For internal use and pedestrian areas, the 38mm specification is also ideal.

All slabs are supplied hand finished with a fine rubbed surface for an exquisite fine finish.

 Please note that stone is a natural product and all results are indicative and subject to variation.

For split crates or collected prices please contact us here or call on 01282 860571




Fixed widths of 600mm X Random (L) - Minimum 400mm to Maximum 1100mm
Random Sizes – Random (W) Minimum 300 to Maximum 575mm x Random (L) Minimum 450 to maximum 1000mm
@ 50mm or 38mm thickness. (other sizes and thicknesses available on request).

Edge Profile:


Surface Finish:

 Sawn and fine rubbed

Suitable for:

 Internal Flooring, Patios, Terraces, Paths and LGV vehicular areas.

**Steps, Coping Stones, Pool Surrounds, Pier Caps and other masonry items can be produced in this stone (please enquire for further details).

Cutting Tolerance:

 +/- 3mm

Sold in exact quantities required:

 Sold by the pack


 Raw materials kept in stock - please contact us for lead time.

Here at Bridge Street Stone we recommend that all Flagstones purchased from us are laid on a full bed of mortar, bedding each slab individually to account for variation in thickness. This method is most commonly used when laying Natural Stone due to the thickness variation, which relies on each flag having a bed prepared for it individually. Once the bed is prepared, the flag is laid and then the next bed prepared and so on. To determine the correct way up, you will notice that each given flag edge tapers inwards. It is the larger surface area to be seen therefore the smaller surface area (tapered in) is the underneath. To finish, we recommend using ‘JOINT IT’ . This particular product is used for jointing paving slabs, cobbles & Natural Stone by simply brushing in. Once your Paving/Driveway area is complete to finish off we also recommend sealing the area with Hg Impregnator which is a Basic treatment for natural stone against penetration of dirt and grease stains.

We can provide very competitive delivery prices to most destinations within mainland UK.

Some combinations of product and destination cannot be calculated online. If you cannot find the delivery charge to your area, please call our sales team on 01282 860 571 or email for a delivery quote.

Please refer to our Delivery Terms at the bottom of our home page.

postcode delivery table